注:因自动化各进口品牌备件型号繁多,产品价格实时变化,因此很难实时标出准确价格,请以业务员实际报价单价格为准! 给您带来不便敬请谅解。
Multilin F650 专为馈线或相关应用的保护、控制和自动化而设计。Multilin F650 馈线保护继电器为馈线管理和间隔控制应用提供高速保护和控制,并配有大型 LCD 和单线图,可用于对各种馈线布置(包括环形母线、双断路器)进行间隔监视和控制。或用于断路器和一半。 主要优点 适用于馈线应用的全面、灵活的保护和控制装置 通过减载和转移方案增加系统正常运行时间并提高稳定性 用于定制保护和控制解决方案的先进自动化功能 人机界面 (HMI),配有图形 LCD、可编程按钮以及用于选择设置菜单和子菜单的简易按键 通过模块化抽出式结构减少更换时间 通过 IEEE 1588 (PTP)、IRIG-B 和 SNTP 时间同步(配置两个不同的 SNTP 主站)、事件报告、波形捕获和数据记录器,减少故障排除时间和维护成本 通过支持串行和以太网接口以及多种协议的通信简化系统集成 嵌入式 IEC® 61850 协议(并支持第 2 版)、IEC 60870-5-103/104、IEC 62439/PRP/HSR、IEEE 802.1D/RSTP 经过验证的互操作性和 KEMA 61850 第 2 版认证
应用领域 对直接接地、高阻抗接地或谐振接地系统上的馈线进行主或后备保护和控制 总线阻塞/联锁方案 弧闪高速故障检测 投递方案(公交车换乘方案申请) 基于电压和频率要素的减载方案 分布式发电 (DG) 互连保护,包括主动和被动防孤岛
The communication module of the programmable controller is equivalent to the network interface in the local area network. The communication module data bus is connected with the host of the programmable controller, and the communication protocol is realized by hardware and software together. The communication module of the programmable controller is generally equipped with several interfaces, which can be selected through the selection switch on the communication module to realize the communication with other programmable controllers, intelligent control devices or computers.
The input module is used to receive and collect the input signal. The input signal has two types: one is the switch input signal provided by the button switch, the stroke switch, the digital dip switch, the proximity switch, the photoelectric switch, the pressure relay, etc. The other is a continuously changing analog input signal sent by potentiometer, thermoelectric, tonometer motor, and various transmitters. The input module also needs to convert these different level signals into digital signals that the CPU can receive and process.
The function of the output module is to receive the digital signal processed by the central processor, and convert it into a signal that can be received by the field executive parts, which is used to control the contactor, solenoid valve, regulating valve, speed regulating device, etc. Another type of load control is the indicator light, digital display and alarm device.
离散输入模块
开关量输入模块从输入设备(如传感器、按钮和开关这些可以具有两种状态—开/关的装置)接收信号。模块需要一个底座(IC200CHSxxx)上 。
IC200MDL640 | IC200MDL643 | IC200MDL644 | IC200MDL650 | |
产品名称 | VersaMax开关量 | VersaMax开关量输入模块,5/12 VDC(TTL), | VersaMax开关量输入模块,5/12 VDC(TTL), 正/负逻辑,32点 | VersaMax开关量输入模块,24VDC,正逻辑,32点 |
输入电压 | 0-30 VDC | 0-15 VDC | 0-15 VDC | 0-15 VDC |
点数 | 16 | 16 | 32 | 32 |
通道到通道隔离 | 否 | 否 | 否 | 否 |
输入和输出响应时间-开/关(ms) | 0.5 | 0.25 | 0.25 | 0.5 |
公共点 | 2组8点 | 2组8点 | 4组8点 | 2组8点 |
开状态电流 | 2.0-5.5 mA | 下限1.45 mA | 下限1.45 mA | 2.0-5.5 mA |
关状态电流 | 0-0.5 mA | 0-0.7 mA上限 | 0-0.7 mA上限 | 0-0.5 mA |
输入阻抗 | 上限10 Kohm | 典型2.4 Kohm对应12 VDC | 典型2.4 Kohm对应12 VDC | 上限10 Kohm |
5伏底板电流消耗(mA) | 上限25 | 上限70 | 上限140 | 上限50 |
发光二极管显示 | 每点一个发光二极管显示各点开/关状态;OK发光二极管表明底板电源可用 | 每点一个发光二极管显示各点开/关状态;OK发光二极管表明底板电源可用 | 每点一个发光二极管显示各点开/关状态;OK发光二极管表明底板电源可用 | 每点一个发光二极管显示各点开/关状态;OK发光二极管表明底板电源可用 |
尺寸 | 110 mm(4.3 in)x66.8 mm(2.63 in)x50 mm(1.956 in), 不包含底座或耦合连接器的高度 | 110 mm(4.3 in)x66.8 mm(2.63 in)x50 mm(1.956 in), 不包含底座或耦合连接器的高度 | 110 mm(4.3 in)x66.8 mm(2.63 in)x50 mm(1.956 in), 不包含底座或耦合连接器的高度 | 110 mm(4.3 in)x66.8 mm(2.63 in)x50 mm(1.956 in),不包含底座或耦合连接器的高度 |
主营品牌:ABB、贝利、GE、FOXBORO、英维思TRICONEX、宾利本特利、A-B罗克韦尔、艾默生艾默生、贝加莱、摩托罗拉、富安科、力士乐、库卡、霍尼韦尔、NI、DEIF、横河、伍德沃德、伍德沃德、赖安、施耐德、安川、MOOG、EPRO、PROSOFT等各大品牌
公司专注于DCS、PLC、机器人、大型伺服四大系统
主要产品有各种模块/卡、控制器、触摸屏、伺服驱动器
公司优势:供应进口原装产品,专业生产配件
保修一年,交货时间快,货源齐全!!!
① 24小时邮件回复(12小时);
② 装运到亚洲以外的国家,请与卖方联系。
【免责声明】
我司销售新产品和停产产品,独立渠道购买此类特色产品。贵州源妙自动化设备有限公司不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和微标均为其各自所有者的财产带有这些名称图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的,并不表示与任何权利持有人有任何关联或授权。
本文来自贵州源妙自动化设备有限公司官方网站请附上此链接:http://www.ymbmy.com/GE/
15339537795